Are you having trouble with your pictures coming out too blue? Too orange? Too purple? Okay, so let's hope not purple. Odds are you're not setting your white balance correctly. But don't worry, we're going to get that all straightened out, and you'll have beautiful, regular colored pictures in no time. There is a lot of scientific, intense information on White Balance (WB), and I'm sure if you google it you can get really in depth. However, we're just focusing on the basics and easy terms here. Essentially, there are many different types, shades, and temperatures of light, and our eyes are very good at perceiving them, but our cameras are not. White Balance is the process of removing unrealistic colors from your photos, so that the objects that appear "white" or even in color to your eye, also appear so in your photographs. As always, it's easier to explain with examples.
We are going to be focusing on this section of your display screen, so ignore all the other settings for right now. If you need to, put the rest of your settings on Automatic, just this once, so you can focus on what we're talking about. You can access your different White Balance settings by pushing the WB above your top display screen, and then using your large wheel to move in between the settings. So here we have it set on AWB, that's Automatic White Balance, and is probably what most of you have had it set on until now. AWB is good, but it is just the camera making an estimated guess at what the best white balance would be for what's going on in the photograph. You're going to run into trouble with it if you have multiple light sources, or low light.
Obviously, you would want to use your shade setting actually in the shade and not in the middle of your back yard like I am. But I primarily want to show you the difference in the tones. Your shade setting is going to add back in some of the golden you would lose, if you were just on a sunlight or AWB setting because it is compensating for some of the lack of direct light.
That icon is suppose to look like a fluorescent bulb. You know the old ones in your elementary classrooms that would sometimes go out and half the class would be left in darkness? Yeah, those. It's confusing to us young folks who now have fluorescent bulbs that look like regular light bulbs. But if you take a picture outside with your camera on fluorescent, it will look like this:
K is for Kelvin. Kelvin is literally what is used to measure the temperature of a light source. Kind of confusing, but think of a burning fire. Lower levels of heat are orange and yellow and red, at higher levels it is blue and white. Thus the different "temperatures" of light. This setting allows you to set the color temperature over a broad range.
So there you go! You're on your way to getting great looking pictures. A few parting words before you go. If you have lots of different light sources, say you are inside, with a lamp but there's a big window beside your subject with natural light coming through, what should you do? You want to do what you can to make one light source the dominant source. So either choose a setting to shoot on, and edit later if you have editing software, or close the shades, so the Tungsten is your dominant, or turn off the lamp. You could also use a flash to try and blast out the other options. But just try and think of which setting is going to give you the most even colors.
Also, color as always, is subject to opinion and taste. In other words, if you like a photo but it's on the wrong setting, no biggie! This is a creative art, and it's always fun to experiment. I like most of my nature shots as realistic as I can get color wise, but for people I like to have a little warmer tone. It's all about preference, so have fun!